Description
Two Way Divider 3/8
Look at our in-store range of John Guest products in our Fittings section.
Go have a look at the range on the John Guest website: Two Way Divider 3/8
Pipe Types
John Guest fittings are intended for use with John Guest nylon pipe but are also suitable for use with a wide range of plastic and soft metal pipes including UPVC, ABS, Polyethylene, Nylon, mild steel and copper to the tolerances set out below. Soft plastic pipes, such as Nylon should have a minimum wall thickness of 1.5mm. The pipe must have a good quality surface and be damage-free.
Pipe Tolerances
These John Guest fittings are intended for pipes with outside diameters to the following tolerances
Size | 12mm to 28mm OD |
Tolerance | +0.05 to -0.10mm OD |
Collet Covers
Are available as additional security against the removal of the tube or to provide a simple means of colour coding. The cover is offered in a range of six colours.
Maximum Torque Values
The following maximum torque values should be applied.
Size | 3/8″ | 1/2″ | 3/4″ | 1″ |
Plastic threads | 3.0Nm | 3.0Nm | 4.0Nm | 4.0Nm |
Metal threads | N/A | 4.0Nm | 5.0Nm | 5.0Nm |
Alex K. (verified owner) –